Laurel Electronics LAUREATE SERIES DPM - Manual (Page 16)

-14-
FiLtr
Filtering (continued)
dEc.Pt
Decimal point selection
(Scale and Offset selected)
SCALE
Scale factor multiplier
(not available for tC)
OFFSt
Offset or Zero Value
(coordinates of 2 pts method)
Lo in
Low signal input value
(not available for tC & rtd)
Lo rd
Low Displayed Reading at
Low Signal Input
Hi In
High Signal Input Value
0 Low threshold level
1 High threshold level
0 Autofilter
1 Batch avg, 16 rdgs.
2 Moving avg, .08 sec.
3 Moving avg, .15 sec.
4 Moving avg, .3 sec.
5 Moving avg, .6 sec.
6 Moving avg, 1.2 sec.
7 Moving avg, 2.4 sec.
8 Moving avg, 4.8 sec.
9 Moving avg, 9.6 sec.
A Unfiltered
d.dddd dd.ddd ddd.dd
dddd.d ddddd. .ddddd
Select 0 through 9 for
flashing digit and decimal
point location when decimal
point is flashing
Select 0 through 9 for
flashing digit. Decimal point
location is fixed by dEC.Pt
selection
Select 0 through 9 for
flashing digit. Decimal point
location is fixed by input range
chosen.
Select 0 through 9 for
flashing digit. Decimal point
location is fixed by dEC.Pt
selection
Select 0 through 9 for
flashing digit. Decimal point
location determined by input
range chosen.
DIGIT SELECT KEY VALUE SELECT KEY
00000
Adaptive filter response
00000
Input signal filtering
d.dddd
0.0000 0.0000 0.0000
0.0000 0.0000 0.0000
0.0000 0.0000 0.0000
0.0000 0.0000
0.0000 0.0000 0.0000
0.0000 0.0000
0.0000 0.0000 0.0000
0.0000 0.0000
0.0000 0.0000 0.0000
0.0000 0.0000
MENU KEY