Panel mounting, Connectors – Laurel Electronics LAUREATE SERIES DPM User Manual
Page 9
Advertising
-7-
FRONT VIEW
Mounting Pawl
TOP VIEW
J1 J2 J3 J4 J5
48mm
(1.89in)
96mm
(3.78in)
J1 J2 J3 J4 J5
102mm
(4.02in)
5mm
(0.197in)
10mm
(0.394in)
REAR VIEW
SIDE VIEW
PANEL CUTOUT
92 +0.8/-0.0mm
(3.622 +.032/-0.0in)
45 +0.6/-0.0mm
(1.772 +.024/-0.0in)
6.
PANEL MOUNTING
Ensure the O-ring is in place. Turn the two mounting screws counterclockwise until the space
between the mounting pawl and the bezel is greater than the panel thickness. Insert the meter
in the panel cutout. Turn the mounting screws clockwise until the meter is securely mounted
in the panel. Do not overtighten the mounting screws.
The meter uses UL/VDE rated screw terminal connections that plug into the mating PC jack.
7.
CONNECTORS
Advertising