Nova-Tech PMB Moisture Analyzer - Manual (Page 17)

15
| P a g e © Adam Equipment Company 2009
[PST] / Î or
[Right]
Store or Recall pre-stored test
parameters. To advance a flashing digit by
one position to the right.
To go back by one step during
setup functions
[Print] /
Í or
[Left]
Instructs the analyzer to print data To advance a flashing digit by
one position to the left
[Dspl] /
Ï or
[Up]
Changes the display to read other
data during a moisture test.
To increase or change a
displayed value or scroll
through options forward
[Setup/Enter] Enters the Setup parameters
(Supervisor Menus) Enters a function or saves a
value while manually entering
unit weight or check weighing
limits
4.1 NUMERIC ENTRY METHOD
To set a value when required, use the keys as given below-
- [Dspl/Up] and [Test/Down] keys to increase or decrease the flashing digit
- [Print/Left] and [PST/Right] keys to advance or move back the digit
- [Setup/Enter] key to accept the value