Nova-Tech PMB Moisture Analyzer - Manual (Page 30)

28
| P a g e © Adam Equipment Company 2009
When storing a test procedure the user has the option of adding a text or
numeric name to the test. The top display will show “PST NAME” then show
“- - - - - - - - - “ . To enter a name, use the up/down arrow keys to cycle
through numbers and letters. Use the left right arrows to move the flashing
digit to the left or right.
— . / 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Up to 10 characters can be used to describe the test. Press [Setup/Enter]
at any time to finish the description. If no name is added the field will be
shown as blanks when the name is shown during the recalling process.
6.3 RECALL
TEST SETTINGS
Recalling the test settings can be done by selecting “PST RECALL” then
scrolling through the stored settings using the up/down arrow keys to find the
desired settings and then pressing the [Setup/Enter] key to recall them.
When the PST XX number has been selected the name given to the test will
be displayed
If PST 00 is selected the default test settings are recalled. These can never
be cleared or overwritten. If a test is not stored it is not displayed, i.e. If only 3
tests are stored then only those 3 plus the default are seen when recalling the
test settings.
BREAD-4 PST NAME