E-Mon E-MM-RTU-D-N - Manual (Page 34)

Chapter 3 Multi-Mon Display Operations Menu Operations
34 Multi-Mon Multiple Circuit Energy Monitor
Label Label Label Label Parameter Parameter Parameter Parameter Options Options Options Options Default Default Default Default Description Description Description Description
Country Country Country Country Country code Default, or
country name Default Defines a currency and
calendar settings. The default
setting stands for the U.S.A.
Daylight Daylight Daylight Daylight Daylight saving
time (DST)
option Disabled,
Enabled Disabled When DST is disabled, the
RTC will operate in standard
time only. When enabled, the
Multi-Mon will automatically
update the time at 2:00 AM at
the pre-defined DST switch
dates.
DST Mon DST Mon DST Mon DST Mon DST start month January-
December
April
DST DST DST DST
Week
Week Week Week
DST start week
of the month First, Second,
Third, Fourth,
Last First
DST Day DST Day DST Day DST Day DST start day of
the week
Sunday-
Saturday Sunday
The date when Daylight
Saving Time begins. The DST
switch point is specified by the
month, week of the month and
weekday. By default, DST
starts at 2:00 AM on the first
Sunday in April of each year.
End Mon End Mon End Mon End Mon DST end month January-
December
October
End Week End Week End Week End Week DST end week
of the month
First, Second,
Third, Fourth,
Last Last
End Day End Day End Day End Day DST end day of
the week Sunday-
Saturday Sunday
The date when Daylight
Saving Time ends. The DST
switch point is specified by the
month, week of the month and
weekday. By default, DST
ends at 2:00 AM on the last
Sunday in October of each
year.
Meter Security Meter Security Meter Security Meter Security
This menu allows you to change the user password and define a level of the
device security for accessing the Multi-Mon through communication ports.
To enter the menu, select the Access entry from the main menu, and then
press the ENTER button. For instructions on navigating in the menu, see
Viewing and Changing Setup Items .
The following table lists available options.
Label Label Label Label Parameter Parameter Parameter Parameter Options Options Options Options Default Default Default Default Description Description Description Description
Password Password Password Password User
password 0-99999999 Factory set
(consult
your dealer) A user password for
accessing the device menus.
It is effective for the display
and for all ports
Com.Pass Com.Pass Com.Pass Com.Pass Remote
password
checking OFF, ON ON Controls password checking
when the Multi-Mon is
accessed through
communication ports
Display Settings Display Settings Display Settings Display Settings
This menu allows you to configure options for the Multi-Mon display.
To enter the menu, select the Display entry from the main menu, and then
press the ENTER button.
For instructions on navigating in the menu, see Viewing and Changing Setup
Items .
The following table lists available options.
Label Label Label Label Parameter Parameter Parameter Parameter Options Options Options Options Default Default Default Default Description Description Description Description
Update Update Update Update Display update
rate 1-10 sec 1 sec Defines the interval between
display updates
Scroll Scroll Scroll Scroll Auto scroll
interval None, 2-15
sec None Defines the scroll interval for
the main data display or
disables auto scroll
Access Exit
Access Password
9
ENTER
Display Exit
Display Update
1
ENTER