E-Mon E-MM-RTU-D-N - Manual (Page 46)

Chapter 4 Power Software Configuration tool General Meter Setup
46 Multi-Mon Multiple Circuit Energy Monitor
The following table lists available options.
Parameter Parameter Parameter Parameter Options Options Options Options Default Default Default Default Description Description Description Description
Ratio Correction
Factor 0.700 to 1.300 1.000 The ratio of the true transformer
ratio to the marked ratio.
Phase Angle Error,
minutes -600 to 600
0 The phase displacement, in
minutes, between the primary
and secondary values. The
phase angle of a transformer is
positive when the secondary
value leads the primary value.
Local Settings Local Settings Local Settings Local Settings
The Local Settings setup allows you to specify your time zone and daylight
saving time options.
To configure the time zone options for your device, select the device site
from the list box on the Power Software toolbar, select General Setup from
the Meter Setup menu, and then click on the Local Settings tab.