E-Mon E-MM-RTU-D-N - Manual (Page 51)

Chapter 4 Power Software Configuration tool Configuring Billing Energy and TOU Registers
Multi-Mon Multiple Circuit Energy Monitor 51
Totalization Submeters Totalization Submeters Totalization Submeters Totalization Submeters
If you wish to automatically totalize energy measured by a number of
submeters by using a separate totalization submeter, select a source
submeter in the Source Input column on the Register Source List pane
(starting with source 5), and then select the desired target totalization
submeter in the Target column. Repeat these steps for all source submeters
while selecting the same totalization submeter as the target.
Selecting a submeter as a target automatically connects all active energy
registers of the source submeters to its energy registers, thus making it a
totalization submeter. Note that each totalization submeter takes its own
communication address in a sequential order along with the metering
submeters (see
Submeter Addressing ).
Configuring the Daily Tariff Schedule Configuring the Daily Tariff Schedule Configuring the Daily Tariff Schedule Configuring the Daily Tariff Schedule
To configure your daily tariff schedule, select Energy/TOU from the Meter
Setup menu, and then click on the TOU Daily Profiles tab.
The daily profile setup allows you to specify the daily tariff change points with
a 15-minute resolution for six tariffs and four seasons.
To configure your daily profiles:
1. Select the desired season and day type.
2. Select the start time for each tariff change point and the corresponding
active tariff number.
3. Repeat the setup for all active profiles.
The first tariff change point is fixed at 00:00 hours, and the last tariff change
you specified will be in use until 00:00 hours on the next day.
The energy daily profile log will be automatically configured for the number of
active tariffs you defined in the Multi-Mon TOU daily profile.
Configuring the Season Tariff Schedule Configuring the Season Tariff Schedule Configuring the Season Tariff Schedule Configuring the Season Tariff Schedule
To configure your season tariff schedule, select Energy/TOU from the Meter
Setup menu, and then click on the TOU Calendar tab.
The TOU calendar allows you to configure any tariff schedule based on any
possible utility regulation. The calendar itself has 32 entries that allow you to
specify profiles for working days and holidays through all seasons in any