E-Mon E-MM-RTU-D-N - Manual (Page 70)

Appendix E Data Scales
70 Multi-Mon Multiple Circuit Energy Monitor
Appendix E Appendix E Appendix E Appendix E Data Scales Data Scales Data Scales Data Scales
The maximum values for volts, amps and power in the Multi-Mon setup and
in communications are limited by the voltage and current scale settings. See
Basic Meter Setup in Chapter 4 on how to change the voltage scale in your
meter.
The following table defines the meter data scales.
Scale Scale Scale Scale Range Range Range Range Notes Notes Notes Notes
Maximum voltage (V max) Voltage scale × PT Ratio, V The default voltage
scale is 600V
Maximum current (I max) CT Primary current × 2, A The default CT
primary current is
50A
Maximum power 1 V max × I max × 2, W
1 Maximum power is rounded to whole kilowatts. With PT=1.0, it is limited
to 9,999,000 W.