E-Mon E-MM-RTU-D-N - Manual (Page 58)

Chapter 4 Power Software Configuration tool Data Monitoring
58 Multi-Mon Multiple Circuit Energy Monitor
Data Monitoring Data Monitoring Data Monitoring Data Monitoring
Viewing Real Viewing Real Viewing Real Viewing Real----Time Data Time Data Time Data Time Data
Real-time data can be continuously retrieved from the Multi-Mon submeters,
updated on the screen at the rate you defined in the Instrument Setup, and
recorded to a file. You can view acquired data in a tabular or in a graphical
form as a data trend.
For information on the real-time data monitoring and recording options, see
the Power Software Getting Started Guide.
To get data from all submeters in a single window, click on the Multi-meter
View button on the local toolbar.
Any energy and maximum demand registers in the Multi-Mon submeters can
be read and recorded to files through the Power Software Data Monitor.
Retrieving Log Files Retrieving Log Files Retrieving Log Files Retrieving Log Files
Using Power Software, you can retrieve the event and data log files from the
Multi-Mon submeters and save them to files on your PC in the MS Access
database format.
Historical data is uploaded on demand any time you need it, or periodically
through the Upload Scheduler that retrieves data automatically on a
predefined schedule, for example, daily, weekly or monthly. If you do not
change the destination database location, new data is added to the same
database so you can have long-term data trends and energy profiles in one
database regardless of the upload schedule you selected.
For information on uploading files and configuring the Upload Scheduler for
the Multi-Mon submeters, see the Power Software Getting Started Guide.