E-Mon E-MM-RTU-D-N - Manual (Page 7)

Chapter 1 General Information
Multi-Mon Multiple Circuit Energy Monitor 7
Chapter Chapter Chapter Chapter 1 1 1 1 General Information General Information General Information General Information
The Multi-Mon is a 3-phase, multi-channel, multi-function energy meter
suitable for use in single-phase and multi-phase electrical networks.
Meter highlights Meter highlights Meter highlights Meter highlights
• Multi-channel submetering – up to 36 single-phase or 18 two-phase
or 12 three-phase submeters in a single device. Any combination of
single-, two-, and three-phase consumers can be chosen up to a
total of 36 current inputs.
• Automatic totalization energy from different sub-consumers
Fea Fea Fea Features tures tures tures
• Calibrated to meet Class 0.5S active energy and Class 1 reactive
energy meter accuracy
• 3-phase/2-phase/single-phase meters (true RMS, volts, amps,
power, power factor, neutral current)
• Ampere/Volt demand meter
• Time-of-Use, 4 energy/demand registers x 6 tariffs 1 , 4 seasons x 4
types of days, 8 tariff changes per day, easy programmable tariff
schedule
• Import/export energy and power demands
• Automatic 120–day daily profile for import/export 2 energy and
maximum demand readings (total and tariff registers) separate for
each submeter
• Event recorder for logging internal diagnostic events and setpoint
operations
• Data recorders; programmable periodical data logs separate for
each submeter
• Embedded programmable controller (4 control setpoints,
programmable thresholds and delays) separate for each submeter
• Easy to read 2-row x 16 characters LCD display with backlight
(Multi-Mon only)
• 50/60 Hz operation
• Internal clock, keeping the clock running over one week without
external power
• Highly Accurate Current Transformer with overvoltage protection
diodes to avoid any damage while disconnecting the primary
current sensor
• Standard RS-485 serial port
• Optional second communication port. Communication options
available:
RS-232
RS-422/485
56K Dial-up modem
Ethernet 10/100BaseT
• Modbus RTU and Modbus ASCII communication protocols
• Easy field upgrading device firmware through any communication
port
1 From Firmware version 18.4.1
2 From Firmware version 18.5.1