E-Mon E-MM-RTU-D-N - Manual (Page 39)

Chapter 4 Power Software Configuration tool Preparing Setups
Multi-Mon Multiple Circuit Energy Monitor 39
Preparing Setups Preparing Setups Preparing Setups Preparing Setups
Power Software allows you to prepare setup data for your Multi-Mon off-line
without the need to have it connected to your PC.
Select the appropriate site from the list box on the Power Software toolbar,
and then select the desired setup group from the Meter Setup menu. Click on
the tab with the setup you want to create or modify, and then fill in the boxes
with the desired configuration data. Click the “Save as…” button to store the
data to the site database.
To save your setup to another site database, select it from the file pane.
Click OK.
To reuse setups from another site, copy them to your present site database.
Click Open, select the desired site database, and click OK. The opened
setup is copied to your site database.
You can also copy all setups from one site database into another site's
database. Select a device site from the list box on the toolbar from which you
want to reproduce setups, and then select “Copy to...” from the Meter Setup
menu. Select the site database to which to copy setups, and then click OK.
Downloading Setups Downloading Setups Downloading Setups Downloading Setups
You can update each setup in your Multi-Mon one at time or download all
setups together from the site database.
To update a particular setup, check the On-line button on the Power
Software toolbar, select a submeter site from the list box on the toolbar, and
then select the desired setup group from the Meter Setup menu. Click on the
tab of the setup you want to download to the device, and then click Send.
To download all setups at once, check the On-line button on the toolbar,
select the submeter site from the list box on the toolbar, and then select
Download Setups from the Meter Setup menu.
Device setup settings, excluding the alarm setpoints and data log setup, are Device setup settings, excluding the alarm setpoints and data log setup, are Device setup settings, excluding the alarm setpoints and data log setup, are Device setup settings, excluding the alarm setpoints and data log setup, are
shared across all submeters. Though you can download them to the device
shared across all submeters. Though you can download them to the device shared across all submeters. Though you can download them to the device shared across all submeters. Though you can download them to the device
using any submeter address, your changes affec
using any submeter address, your changes affec using any submeter address, your changes affec using any submeter address, your changes affect all submeters in the t all submeters in the t all submeters in the t all submeters in the
device. device. device. device.
The alarm setpoints and data log setup must be downloaded separately to
every submeter using its local address. If you wish to download the same
settings to all submeters in your device, prepare the alarm setpoints and/or
data log setup for one of the submeters and store them to its site database,
select the submeter site from the list box on the toolbar, and then click
Download to all Submeters on the Meter Setup menu.
Uploading Setups Uploading Setups Uploading Setups Uploading Setups
To upload the setups from the submeter to the site database, check the On-
line button on the Power Software toolbar, select the submeter site from the
list box on the toolbar, and then select Upload Setups from the Meter Setup
menu.
Authorization Authorization Authorization Authorization
If communications with your device is secured, you are prompted for the
password when you send new setup data to the Multi-Mon .