Fairbanks FB2550 SERIES - Manual (Page 126)

Section 10: Traffic Light Control
07/2012 126 51254 Rev. 3
6.1. TRAFFIC LIGHT CONTROL, CONTINUED
20. Press PAGE FORWARD .
21. To the right of the Event to Signal:,
select TIME DELAY OF X
SECONDS Control button.
22. Click on the correct time value.
– This is the time delay from when the
truck enters the scale.
Default = 6 Seconds
23. Select the TRAFFIC
DIRECTION Control button.
– This selects which way the vehicles will
normally be traveling.
24. Choose INBOUND or
OUTBOUND .
25. Select either the SET ALL
OUTPUTS ON or the SET ALL
OUTPUTS OFF Control Button.
– Activates or deactivates the Traffic
Lights.
26. Press the SAVE CHANGES button when any changes are made, or
they will be lost.