Fairbanks FB2550 SERIES - Manual (Page 34)

Section 3: Operations
07/2012 34 51254 Rev. 3
3.9. PRODUCT GROUPS
A PRODUCT GROUP is a filter to permit only specifically selected products to be
used by a customer.
– These groups are assigned to a customer from the Edit Customers menu.
– Supervisor or Service Level access is required to add or edit these Product
Groups.
WORKING EXAMPLE
A vehicle weighs Inbound on the scale. The scale operator is prompted for Loop ID,
Customer ID, and Product ID. When the Product ID is selected, a drop-down
menu appears with the products the customer is limited to use.
Product IDs must be created first, before a Product Group is created.
3.9.1. ADDING OR EDITING PRODUCT GROUPS
1. Press the MENU key.
2. Select LOGIN.
3. Enter the Supervisor Password or
Service Password.
4. Select the CONFIGURATION
MENU .
5. Select DATABASE EDITORS . .