Fairbanks FB2550 SERIES - Manual (Page 61)

Section 5: Input/ Output
07/2012 61 51254 Rev. 3
5.4. PRINTER SETUP AND PROGRAMMING
NOTE: The standard default configuration on the COM Ports to all printers is set at
9600 Baud, 8 data bits, No Parity, and 1 stop bit.
5.4.1. OKI ML420 PRINTER SETTINGS
•
For FB2550 Instrument Desktop and NEMA 4X SERIAL communications, use
cable 25932 or 14807
•
For USB input, use cable 29827C .
•
All printer settings apply to both the Serial and USB models.
BAUD 9600
&*PARITY No
DATA BITS 8
STOP BIT 1
CABLE 14807 WIRING for COM Ports 1-3
DB-9 Instrument Description DB-25 Printer
3 Transmit (Tx) 3
2 Receive (Rx) 2
5 Ground (GND) 7
CABLE 29827C WIRING for Serial Expansion Module *
RS232
Port 1: COM XX
RS232
Port 2: COM XX
RS232
Port 3: COM XX
Description DB-25 Printer
TB1a-3 TB1b-5 TB1d-2 Transmit (Tx) 3
TB1a-2 TB1c-1 TB1d-3 Receive (Rx) 2
TB1a-5 TB1c-2 TB1d-4 Ground (GND) 7
SEL
EXIT
POWER
SHIFT
ALARM
LF
GROUP
Micro Feed
Down
FF/LOAD
Micro Feed
Up
ITEM
MENU
TEAR
SET
PARK
PRINT
QUIET
TOF
SEL
MENU