Fairbanks FB2550 SERIES - Manual (Page 94)

Section 5: Input/ Output
07/2012 94 51254 Rev. 3
5.8.3. METHOD 1 – PRE-CONFIGURED OUTPUT,
CONTINUED
12. Enter the SETTINGS menu to
configure the settings as required.
13. Touch the data field to the right of
the Mode legend and a list of items
will appear from which a selection is
made.
– MODE – This field determines how
the data is transmitted.
– OFF – COM port is disabled.
– CONTINUOUS – The COM port
transmits the data string continuously
per every display update.
– DEMAND – The data string is
transmitted upon receiving the
programmed poll character from a
peripheral device.
– AUTO – The data string is transmitted
upon the printing of a transaction.
– NETWORK (CONTINUOUS) - The data string is transmitted continuously
per every display update through the network connection.
– NETWORK (AUTO) - The data string is transmitted upon the printing of a
transaction through the network connection.