Fairbanks FB2550 SERIES - Manual (Page 56)

Section 4: FB2550 Customization
07/2012 56 51254 Rev. 3
4.4. ENTRY SEQUENCE PROMPTS
The SEQUENCE PROMPTS MENU
enables the built-in customer and product
prompts for a combination of the Inbound,
Outbound, or GTN operation sequences
The Loop ID GTN and Tare GTN prompts are
also customized, enabled or disabled in this
menu.
1. Open the LOGIN menu.
2. Enter the Supervisor Password or
Service Password.
3. Select the CONFIGURATION
MENU .
4. Press the PAGE FORWARD
button once.
5. Select ENTRY SEQUENCE
PROMPTS .
6. In the LOOP ID GTN menu, enter YES to enable or NO to disable the
LOOP ID PROMPT when a GTN operation is performed.
7. In the TARE GTN menu, enter YES to enable or NO to disable the TARE
PROMPT when a GTN operation is performed.
8. In the PRODUCT and CUSTOMER menus, enter YES to enable or NO
to disable the Tare prompt when a GTN operation is performed.
9. Press the SAVE CHANGES button when any changes are made, or
they will be lost.
•
Select BACK: CONFIGURATION MENU to return to the Configuration
Menu.