Fairbanks FB2550 SERIES - Manual (Page 128)

Section 10: Traffic Light Control
07/2012 128 51254 Rev. 3
6.2. THRESHOLD WEIGHTS
1. Open the CONFIGURATION
MENU.
2. Press PAGE FORWARD once.
3. Select THRESHOLD
WEIGHTS .
INITIAL WEIGHT sets the minimum
amount the truck must weigh to initiate a
weighment.
FINAL WEIGHT triggers a print sequence
when the weight on the last section scale
meets or exceeds the value entered.
– Used on a full electronic truck scale.
– Not used in the MANUAL MODE OF OPERATION .
– The data entry boxes to the right of the legend identifiers will accept keyboard
numeric entries to enter the values required.
Default INBOUND WEIGHT = 1,000 lbs.
Default FINAL WEIGHT = 2,000 lbs.
4. Press the SAVE CHANGES button when any changes are made or
they will be lost.
•
Select BACK: CONFIGURATION MENU to return to the Configuration
Menu.