Fairbanks FB2550 SERIES - Manual (Page 97)

Section 5: Input/ Output
07/2012 97 51254 Rev. 3
5.8.4. METHOD 2 - CUSTOMIZING OUTPUT DATA
STRINGS
The FB2550 instrument can also be customized to support numerous manufacturers
software interfaces to peripheral devices.
– When a data string protocol that is required is not similar as one of the pre-
configured outputs, the output data string must be programmed
manually using the Build, Tokens, and Weights menus .
Follow these steps to customize the Output Data String.
1. Select LOGIN and enter the
Supervisor Password or Service
Password.
2. Select the CONFIGURATION
MENU . Press PAGE FORWARD
once.
3. Select CONFIGURE OUTPUTS .
4. Touch the screen to select
CONFIGURE COM X where X is
the desired COM port location to
configure the output data string.
5. Touch the screen to select LOAD .