Fairbanks FB2550 SERIES - Manual (Page 148)

Section 8: Service & Maintenance
07/2012 148 51254 Rev. 3
8.1.2. DATABASE RESTORE, CONTINUED
C. PROCEDURE RESTORE DATABASE FROM DEFAULTS:
1. Select LOGIN and enter the
Supervisor Password or Service
Password.
2. Select DATABASE
MAINTENANCE
3. Select RESTORE DATABASE
FROM DEFAULTS .
A warning will presented display of whether or not to proceed.
It will also indicate to ensure the correct one has been selected.
4. Press CONTINUE button to
complete the process, or press the
CANCEL button to stop the
procedure.
– This process could take several
minutes.
5. When the Database Default
Restore process is complete, press
the
CONTINUE button to return to
the Database Maintenance menu.
6. Press RETURN TO WEIGHING
to exit to the Weigh processing
screen.