Service technician’s responsibilities, Users’ responsibility – Fairbanks Tundra Series Truck Scale User Manual
Page 14
Section 2: Company Service Information
12/12
14
51193 Revision 5
2.1.1. Service Technician’s Responsibilities
All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the original installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability to
be adjusted or calibrated to performance specifications may be charged to
warranty.
The equipment consists of printed circuit
assemblies which must be handled using ESD
handling procedures, and must be replaced as
units.
─ Replacement of individual components is not
allowed.
─ The assemblies must be properly packaged in
ESD protective material and returned intact for
replacement credit per normal procedures.
2.1.2. Users’ Responsibility
Absolutely no physical,
electrical or program
modifications other than
selection of standard options
and accessories are to be
made to this equipment.