Assembly tools, Materials – Fairbanks Tundra Series Truck Scale User Manual
Page 18
Section 3: Pre-Installation
12/12
18
51193 Revision 5
3.4.2. Assembly Tools
A mobile crane
─ Four equal length twenty foot (4-20 ft.) lifting chains or cables with hooks.
IMPORTANT NOTE:
The installer
MUST reserve Crane and Chains/Cables in
advance from a local rental service company.
•
Hand tools
•
Hydraulic jacks
─ Two – twenty ton (2−20 ton) jacks
•
Load Cell Locating Tools,
one for each
load cell, available for purchase through
Fairbanks Customer Service
•
Come-Along (1-Ton min.)
•
2 - Sledge Hammers (5 & 10 lb.)
•
Claw Hammer
•
6’ Pinch Bar
•
3’ Crow Bar
•
Drift Pins
•
Torque or Impact Wrenches (500 ft. lb.)
•
Open End Wrench
•
Adjustable Crescent or Monkey Wrench
•
Trowels (2)
•
Pipe Wrench
3.4.3. Materials
•
Quality vehicle wheel bearing grease
•
Anti-seize
─ Found at local Automotive Parts & Supply retailer.
MUST reserve a Crane
in advance.