Fairbanks Tundra Series Truck Scale - Manual (Page 39)

Section 5: Electrical Installation
12/12 39 51193 Revision 5
5.3. LOAD CELL NUMBERING
• Intalogix
™
Technology installations use a specific numbering system for
load cells because of digital addressing of the SSCs.
• With respect to the following starting position, face the platform where the
indicator is located.
• The cell at the upper-left (far side) of the platform is
Cell One (1).
• The cell positions along the far side have odd cell numbers .
• The near side locations have
even cell numbers.
Above is an example of a four (4) section cell numberings using SSCs.
─ ODD numbered cells are always wired to TB1 .
─
EVEN numbered cells
are always wired to
TB2
.