Ransburg Vector Solo 65KV 79965 Solventborne RS70-AS - Manual (Page 23)

Vector Solo 65kV Applicator - Operation
19 AH-08-02.6
FLUID NOZZLE / AIR CAP
The fluid nozzle and air cap must be selected according to the application. The following charts show
the nozzles and air caps available for the Vector Solo.
* Material: Lacquer, 18 Sec. No. 4 Ford Cup @ 72 o F. Results are material dependent.
** Patterns at 8-inch target distance.
80101-44
80101-44
80122-244
Fluid
Nozzle
Part #
Fluid
Delivery*
(ml/min)
Orifice
ID
(in/mm)
.055/1.4
.055/1.4
.055/1.4
AIR CAP / FLUID NOZZLE PERFORMANCE CHART
300
300
300
Spray Type
Air Spray
Air Spray
LVMP
Air
Cap
79374-65
79374-98
79374-122
Pattern
Size**
(inches)
15±1/2
17±1/2
11.5±1/2
Pressure
Reducer
Yellow
Yellow
Green
Applicators
Solo
Orifice ID
Fluid Nozzle
Part #
80101-44
80101-144
80101-45
80101-145
80101-46
80101-146
80101-47
80101-147
80101-48
80101-48
FLUID NOZZLE
SELECTION CHART
Nozzle Material
1.4mm (.055-inch)
1.4mm (.055-inch)
1.8mm (.070-inch)
1.8mm (.070-inch)
1.0mm (.042-inch)
1.0mm (.042-inch)
.7mm (.028-inch)
.7mm (.028-inch)
1.2mm (.047-inch)
1.2mm (.047-inch) Standard Wear
Extended Wear
Standard Wear
Extended Wear
Standard Wear
Extended Wear
Standard Wear
Extended Wear
Standard Wear
Extended Wear
1.4mm (.055-inch)
1.4mm (.055-inch)
1.8mm (.070-inch)
1.8mm (.070-inch)
1.0mm (.042-inch)
1.0mm (.042-inch)
.7mm (.028-inch)
.7mm (.028-inch)
1.2mm (.047-inch)
1.2mm (.047-inch)
Orifice ID
Fluid Nozzle
Part #
80122-244
80122-344
80122-245
80122-345
80122-246
80122-346
80122-247
80122-347
80122-248
80122-348
FLUID NOZZLE SELECTION
TRANS-TECH. CHART
Nozzle Material
Standard Wear
Extended Wear
Standard Wear
Extended Wear
Standard Wear
Extended Wear
Standard Wear
Extended Wear
Standard Wear
Extended Wear
Ransburg