Ransburg Aerobell 168 Atex Approved 13350 - Manual (Page 64)

Step 13
Step 12
DISASSEMBLY PROCEDURES
(30mm Bell Cup and Shape Air Ring)
Note:
To continue the process of disassembly
procedures of the Aerobell 168 go to
Step 14 on page 64
30mm Bell Cup
Splash Plate
A11388-00 Splash
Plate Removal Tool
To reassemble the Splash Plate, place
the Bell Cup with the back down on
a flat surface and insert the Splash
Plate into the Bell Cup hole. Using the
large end of A11388-00 Splash Plate
Removal Tool gently push into position.
Until an audible “click” is heard.
Aerobell 168 - Maintenance
Ransburg
LN-9247-13 61