Ransburg, Disassembly procedures – Ransburg Aerobell 168 Atex Approved 13350 User Manual
Page 71
Advertising
DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Step 20
Step 19
Step 18
Remove the Turbine (no tool required).
Pull straight off.
Note the alignment marks.
Note: Two (2) locating pins are mount-
ed on the back of the Turbine to insure
proper alignment.
When assembling these pins will easily
insert when the alignment marks are
properly matched.
The Turbine sealed with a O-ring
and may be difficult to remove
NOTE
Aerobell 168 - Maintenance
Ransburg
LN-9247-13
68
Advertising