Ransburg Aerobell 168 Atex Approved 13350 - Manual (Page 76)

Step 9
Step 8
Step 7
DISASSEMBLY PROCEDURES
(For Robot/Machine Mount Kits)
Remove the plastic SHCS from
the Mounting Yoke using the
3/8” Hex Key Wrench .
Remove the plastic SHCS from
the Valve Manifold using the 5/16”
(8mm) Hex Key Wrench .
Remove the plastic Wash Cup Y
Fitting from the Valve Manifold
by hand, no wrench required.
Aerobell 168 - Maintenance
Ransburg
LN-9247-13 73