Ransburg, Disassembly procedures – Ransburg Aerobell 168 Atex Approved 13350 User Manual
Page 69
Advertising
![background image](/manuals/348100/69/background.png)
DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Step 14
Step 13
Step 12
65mm Bell Cup
Splash Plate
A11388-00 Splash Plate
Removal Tool
To reassemble the Splash Plate, place
the Bell Cup with the back down on a
flat surface and insert the Splash Plate
into the Bell Cup hole. Using the large
end of A11388-00 Splash Plate Removal
Tool gently push into position. Until an
audible “click” is heard.
Remove the Fluid Tip using
the A11229-00 Fluid Tip/Tube
Removal Tool.
The Threads on the Fluid Tips
are LEFT HANDED.
NOTE
Aerobell 168 - Maintenance
Ransburg
LN-9247-13
66
Advertising