Figure 61: lldp configuration – LevelOne GSW-4876 User Manual
Page 160
C
HAPTER
4
| Configuring the Switch
Link Layer Discovery Protocol
– 160 –
◆
Mgmt Addr – The management address protocol packet includes the
IPv4 address of the switch. If no management address is available, the
address should be the MAC address for the CPU or for the port sending
this advertisement.
The management address TLV may also include information about the
specific interface associated with this address, and an object identifier
indicating the type of hardware component or protocol entity associated
with this address. The interface number and OID are included to assist
SNMP applications in the performance of network discovery by
indicating enterprise specific or other starting points for the search,
such as the Interface or Entity MIB.
Since there are typically a number of different addresses associated
with a Layer 3 device, an individual LLDP PDU may contain more than
one management address TLV.
W
EB
I
NTERFACE
To configure LLDP timing and advertised TLVs:
1.
Click Configuration, LLDP.
2.
Modify any of the timing parameters as required.
3.
Set the required mode for transmitting or receiving LLDP messages.
4.
Enable or disable decoding CDP frames.
5.
Specify the information to include in the TLV field of advertised
messages.
6.
Click Save.
Figure 61: LLDP Configuration