LevelOne GSW-4876 - Manual (Page 64)

C HAPTER 4 | Configuring the Switch
Configuring Security
– 64 –
N OTE :
This guide assumes that RADIUS and TACACS+ servers have already
been configured to support AAA. The configuration of RADIUS and
TACACS+ server software is beyond the scope of this guide. Refer to the
documentation provided with the RADIUS and TACACS+ server software.
P ARAMETERS
These parameters are displayed:
◆ Client – Specifies how the administrator is authenticated when logging
into the switch via Telnet, SSH, or a web browser.
◆ Authentication Method – Selects the authentication method.
(Options: None, Local, RADIUS, TACACS+; Default: Local)
Selecting the option “None” disables access through the specified
management interface.
◆ Fallback – Uses the local user database for authentication if none of
the configured authentication servers are alive. This is only possible if
the Authentication Method is set to something else than “none” or
“local.”
W EB I NTERFACE
To configure authentication for management access:
1.
Click Advanced Configuration, Security, Switch, Auth Method.
2.
Configure the authentication method for management client types, and
specify whether or not to fallback to local authentication if no remote
authentication server is available.
3. Click Save.
Figure 15: Authentication Method for Management Access