Configuring the switch, Configuring system information, Onfiguring – LevelOne GSW-4876 User Manual
Page 45: Witch, Figure 3: system information configuration
– 45 –
4
C
ONFIGURING
THE
S
WITCH
This chapter describes all of the basic configuration tasks.
C
ONFIGURING
S
YSTEM
I
NFORMATION
Use the System Information Configuration page to identify the system by
configuring contact information, system name, and the location of the
switch.
P
ATH
Basic/Advanced Configuration, System, Information
P
ARAMETERS
These parameters are displayed:
◆
System Contact – Administrator responsible for the system.
(Maximum length: 255 characters)
◆
System Name – Name assigned to the switch system.
(Maximum length: 255 characters)
◆
System Location – Specifies the system location.
(Maximum length: 255 characters)
W
EB
I
NTERFACE
To configure System Information:
1.
Click Configuration, System, Information.
2.
Specify the contact information for the system administrator, as well as
the name and location of the switch.Click Save.
Figure 3: System Information Configuration