LevelOne GSW-4876 - Manual (Page 229)

C HAPTER 5 | Monitoring the Switch
Displaying Information About Security Settings
– 229 –
D ISPLAYING P ORT
S TATUS FOR
A UTHENTICATION
S ERVICES
Use the Network Access Server Switch Status page to show the port status
for authentication services, including 802.1X security state, last source
address used for authentication, and last ID.
P ATH
Monitor, Security, Network, NAS, Switch
P ARAMETERS
These parameters are displayed:
◆ Port – The switch port number. Click to navigate to detailed NAS
statistics for this port.
◆ Admin State – The port's current administrative state. Refer to NAS
Admin State for a description of possible values (see page 87 ).
◆ Port State – The current state of the port. Refer to NAS Port State for
a description of the individual states (see page 87 ).
◆ Last Source – The source MAC address carried in the most recently
received EAPOL frame for EAPOL-based authentication, and the most
recently received frame from a new client for MAC-based
authentication.
◆ Last ID – The user name (supplicant identity) carried in the most
recently received Response Identity EAPOL frame for EAPOL-based
authentication, and the source MAC address from the most recently
received frame from a new client for MAC-based authentication.
◆ QoS Class – The QoS class that NAS has assigned to this port. This
field is blank if the has not been assigned by NAS. Refer to “RADIUS-
Assigned QoS Enabled” for a description of this attribute (see page 87 ).
◆ Port VLAN ID – The VLAN in which NAS has placed this port. This field
is blank if the Port VLAN ID is not overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, “(RADIUS-assigned)”
is appended to the VLAN ID. Refer to “RADIUS-Assigned VLAN Enabled”
for a description of this attribute (see page 87 ).
If the port is moved to the Guest VLAN, “(Guest)” is appended to the
VLAN ID. Refer to “Guest VLAN Enabled” for a description of this
attribute (see page 87 ).