LevelOne GSW-4876 - Manual (Page 269)

C HAPTER 5 | Monitoring the Switch
Displaying LLDP Information
– 269 –
◆ Rx Tw – The link partner's time the receiver would like the transmitter
to hold off to allow time for it to wake from sleep.
◆ Fallback Receive Tw – The link partner's fallback receive Tw.
A receiving link partner may inform the transmitter of an alternate
desired Tw_sys_tx. Since a receiving link partner is likely to have
discrete levels for savings, this provides the transmitter with additional
information that it may use for a more efficient allocation. Systems that
do not implement this option use a default that is the same as that of
the Receive Tw_sys_tx. (Refer to IEEE 802.3az for further information
on these system variables.)
◆ Echo Tx Tw – The link partner's Echo Tx Tw value.
The respective echo values shall be defined as the local link partner’s
reflection (echo) of the remote link partner’s respective values. When a
local link partner receives its echoed values from the remote link
partner it can determine whether or not the remote link partner has
received, registered and processed its most recent values. For example,
if the local link partner receives echoed parameters that do not match
the values in its local MIB, then the local link partner infers that the
remote link partner’s request was based on stale information.
◆ Echo Rx Tw – The link partner's Echo Rx Tw value.
◆ Resolved Tx Tw – The resolved Tx Tw for this link (not the link
partner). The resolved value that is the actual “tx wakeup time” used
for this link (based on EEE information exchanged via LLDP).
◆ Resolved Rx Tw – The resolved Rx Tw for this link (not the link
partner). The resolved value that is the actual “tx wakeup time” used
for this link (based on EEE information exchanged via LLDP).
◆ EEE in Sync – Shows if the switch and link partner have agreed on
wake times:
■
Red - Switch and link partner have not agreed on wakeup times.
■
Green - Switch and link partner have agreed on wakeup times.
W EB I NTERFACE
To display LLDP neighbor EEE information, click Monitor, LLDP, EEE.
Figure 139: LLDP Neighbor EEE Information