Showing igmp snooping information, Showing igmp snooping status, Igmp s – LevelOne GSW-4876 User Manual

Page 259

Advertising
background image

C

HAPTER

5

| Monitoring the Switch

Showing IGMP Snooping Information

– 259 –

S

HOWING

IGMP S

NOOPING

I

NFORMATION

Use the IGMP Snooping pages to display IGMP snooping statistics, port

members of each service group, and information on source-specific groups.

S

HOWING

IGMP

S

NOOPING

S

TATUS

Use the IGMP Snooping Status page to display IGMP querier status,

snooping statistics for each VLAN carrying IGMP traffic, and the ports

connected to an upstream multicast router/switch.

P

ATH

Monitor, IPMC, IGMP Snooping, Status

P

ARAMETERS

These parameters are displayed:

Statistics

◆

VLAN ID – VLAN Identifier.

◆

Querier Version – IGMP version used by the switch when serving as

the IGMP querier.

◆

Host Version – IGMP version used when used by this switch when

serving as a host in IGMP proxy mode.

◆

Querier Status – Shows the Querier status as “ACTIVE” or “IDLE.”

When enabled, the switch can serve as the Querier, which is responsible

for asking hosts if they want to receive multicast traffic.

◆

Querier Transmitted – The number of transmitted Querier messages.

◆

Querier Received – The number of received Querier messages.

◆

V1 Reports Received – The number of received IGMP Version 1

reports.

◆

V2 Reports Received – The number of received IGMP Version 2

reports.

◆

V3 Reports Received – The number of received IGMP Version 3

reports.

◆

V2 Leaves Received – The number of received IGMP Version 2 leave

reports.

Router Port

◆

Port – Port Identifier.

◆

Status – Ports connected to multicast routers may be dynamically

discovered by this switch or statically assigned to an interface on this

switch.

Advertising