LevelOne GSW-4876 - Manual (Page 195)

C HAPTER 4 | Configuring the Switch
Quality of Service
– 195 –
3. Click Save.
Figure 82: Configuring DSCP Translation and Re-mapping
C ONFIGURING DSCP
C LASSIFICATION
Use the DSCP Classification page to map DSCP values to a QoS class.
P ATH
Advanced Configuration, QoS, DSCP Classification
P ARAMETERS
These parameters are displayed:
◆ QoS Class – Shows the mapping options for QoS class values.
◆ DSCP – DSCP value. (Range: 0-63)
W EB I NTERFACE
To map DSCP values to a QoS class and drop precedence level:
1.
Click Advanced Configuration, QoS, DSCP Classification.
2. Map key DSCP values to a corresponding QoS class.
3.
Click Save.
. . .