LevelOne GSW-4876 - Manual (Page 271)

C HAPTER 5 | Monitoring the Switch
Displaying the MAC Address Table
– 271 –
◆ Age-Outs – Each LLDP frame contains information about how long the
LLDP information is valid (age-out time). If no new LLDP frame is
received within the age-out time, the LLDP information is removed, and
the Age-Out counter is incremented.
W EB I NTERFACE
To display statistics on LLDP global counters and control frames, click
Monitor, LLDP, Port Statistics.
Figure 140: LLDP Port Statistics (no header)
D ISPLAYING THE MAC A DDRESS T ABLE
Use the MAC Address Table to display dynamic and static address entries
associated with the CPU and each port.
P ATH
Monitor, MAC Address Table
P ARAMETERS
These parameters are displayed:
◆ Start from VLAN # and MAC address # with # entries per page –
These input fields allow you to select the starting point in the table.
◆ Type – Indicates whether the entry is static or dynamic. Dynamic MAC
addresses are learned by monitoring the source address for traffic
entering the switch. To configure static addresses, refer to "Configuring
the MAC Address Table" on page 166 .
◆ VLAN – The VLAN containing this entry.
◆ MAC Address – Physical address associated with this interface.
◆ Port Members – The ports associated with this entry.