LevelOne GSW-4876 - Manual (Page 272)

C HAPTER 5 | Monitoring the Switch
Displaying Information About VLANs
– 272 –
W EB I NTERFACE
To display the address table, click Monitor, MAC Address Table.
Figure 141: MAC Address Table
D ISPLAYING I NFORMATION A BOUT VLAN S
Use the monitor pages for VLANs to display information about the port
members of VLANs, and the VLAN attributes assigned to each port.
VLAN M EMBERSHIP
Use the VLAN Membership Status page to display the current port
members for all VLANs configured by a selected software module.
P ATH
Monitor, VLANs, VLAN Membership
P ARAMETERS
These parameters are displayed:
◆ VLAN User – A software module that uses VLAN management services
to configure VLAN membership and VLAN port settings such as the
PVID or untagged VLAN ID. This switch supports the following VLAN
user modules:
■
Static: Ports statically assigned to a VLAN through the CLI, Web or
SNMP.
■
NAS: Provides port-based authentication, which involves
communications between a Supplicant, Authenticator, and an
Authentication Server.
■
MVR: Eliminates the need to duplicate multicast traffic for
subscribers in each VLAN. Multicast traffic for all channels is sent
only on a single (multicast) VLAN.
■
Voice VLAN: A VLAN configured specially for voice traffic typically
originating from IP phones.
■
MSTP: The 802.1s Multiple Spanning Tree protocol uses VLANs to
create multiple spanning trees in a network, which significantly
improves network resource utilization while maintaining a loop-free
environment.