LiftMaster CSW24V High-Cycle Commercial DC Swing Gate Operator - Manual (Page 14)

12
INSTALLATION
STANDARD INSTALLATION ONLY
STANDARD INSTALLATION ONLY
For compact installation start on page 16.
DETERMINE LOCATION FOR CONCRETE PAD AND
OPERATOR
DO NOT run the operator until instructed.
The illustration below shows the recommended dimensions for a standard installation.
If these dimensions are not applicable for your installation refer to the chart on the
following page for alternate dimensions.
28”
24”
Outside Property
Inside Property
29.5”
35.5” 11”
2”
46”
25”
10”
Short Arm
Long Arm
Hinge Center
Concrete Pad
STANDARD INSTALLATION
Refer to the illustration to determine the measurements and location of the concrete
pad.