LiftMaster CSW24V High-Cycle Commercial DC Swing Gate Operator - Manual (Page 38)

36
FEATURE PRIMARY OPERATOR SECONDARY OPERATOR
QUICK CLOSE Switch ON OFF
ANTI-TAIL Switch ON OFF
LOW BATT Switch Battery Fail OPEN: OPEN
Battery Fail CLOSE: CLOSE
Battery Fail OPEN: OPEN
Battery Fail CLOSE: CLOSE
AC FAIL OPEN/BATT Switch OPEN OPEN
FEATURE PRIMARY OPERATOR SECONDARY OPERATOR
Timer-to-Close Set the TTC dial to desired setting OFF
Bi-Part Delay
Switch
Bi-Part Delay: ON (will open last &
close first)
Tandem Mode: OFF
Synchronized Close: ON
Bi-Part Delay: OFF (will open
first & close last)
Tandem Mode: OFF
Synchronized Close: ON
ACCESSORY PRIMARY OPERATOR SECONDARY OPERATOR
Remote Controls Program remote controls 1 to 50
to the primary operator.
Program remote controls 51 to
100 to the secondary operator
LiftMaster Internet
Gateway
Program to primary operator.
Garage Door Monitor Program to primary operator.
ADDITIONAL FEATURES
SAMS WIRING WITH RELAYS NOT ENERGIZED +
DUAL GATE SETTINGS
Access Device
Exit Input
Shadow Input
AUX Relay 1
C
NO
Auxiliary
Command
Dipswitch settings for AUX Relay 1:
1-OFF, 2-OFF, 3-ON
Main Board
Expansion Board
Barrier Arm Operator
SAMS WIRING WITH RELAYS NOT ENERGIZED
EXPANSION BOARD
DUAL GATE SETTINGS
NOTE: We recommend that all accessories and board configurations are set on the primary operator.
MAIN CONTROL BOARD