Teledyne LeCroy WaveMaster 8 Zi_Zi-A - Manual (Page 39)

Getting Started Manual
922133-00 Rev A 31
Setup information for horizontal cursors, including the time between
cursors and the frequency, is shown beneath the TimeBase and Trigger
trace descriptor labels.
Shortcut Toolbar Buttons
You can access the same functions available from the Signal Display Grid
Pop-Up menu by clicking a trace-descriptor label and using the toolbar of
buttons at the bottom of the setup dialogs.
For more information, see the Shortcut Toolbar Buttons section of Dialog
Area (on page 33).
Annotating Traces
The instrument gives you the ability to add an identifying label, bearing
your own text, to a waveform display:
For each waveform, you can create multiple labels and turn them all on or
all off. Also, you can position them on the waveform by dragging or by
specifying an exact horizontal position.
Touch the waveform you want to annotate right on the display grid, and
then touch Set label... on the pop-up menu. A dialog box opens in which to
create the label. The first time creating a waveform label, Label1 is
provided as default text when the Add label button is touched.