Teledyne LeCroy WaveMaster 8 Zi_Zi-A - Manual (Page 40)

WaveMaster 8 Zi/Zi-A Oscilloscopes
32 922133-00 Rev A
From this pop-up you can edit existing annotations, change the label
placement on the waveform, add labels, remove labels, and toggle the
visibility. The following bullets show you how.

If you are modifying an existing label, under Labels touch the label
you want to change.
Note: If the dialog for the trace you want to annotate is currently
displayed, you can touch the label button at the bottom to display
the Trace Annotation setup dialog.
You may place a label anywhere you want on the waveform. Labels
are numbered sequentially according to the order in which they are
added, and not according to their placement on the waveform.

If you want to change the label's text, touch inside the Label Text
field. A pop-up keyboard appears for you to enter your text. Touch
O.K. on the keyboard when you are done. The edited text
automatically appears in the label on the waveform.

Precisely place the label by touching inside the Horizontal Pos. field
and provide a horizontal value, using the pop-up numeric keypad.