Teledyne LeCroy WaveMaster 8 Zi_Zi-A - Manual (Page 46)

WaveMaster 8 Zi/Zi-A Oscilloscopes
38 922133-00 Rev A
Default and Keypad Buttons on the Slider Bar are only shown on 7, 8, and 9
Zi models (with a keyboard attached).
Shortcut Toolbar Buttons
Several dialogs contain common functions accessible from a row of buttons
along the bottom of the main setup dialogs.
For example, these buttons at the bottom of the Channel Setup dialog
perform the following functions:

Measure - Opens the Measure menu. You can then select a
parameter from this menu without leaving the Channel Setup dialog.
The parameter automatically appears below the grid.

Zoom - Creates a zoom trace of the channel trace whose dialog is
currently displayed.

Math - Opens the Math menu. You can then select a math function
from this menu without leaving the Channel Setup dialog. A math
trace of the channel whose dialog is currently open is automatically
displayed.

Decode - Opens the main Serial Decode dialog where protocol
option measurements can be applied to signals.

Store - Loads the channel trace into the next available memory
location (M1 to M4).

Find Scale - Automatically performs a vertical scaling that fits the
waveform into the grid.

Next Grid - Automatically moves the channel trace whose dialog is
currently open onto the next grid. If you have only one grid
displayed, a new grid will be created automatically, and the trace
moved.
Note: This button is not available on all oscilloscope models.

Label - Enables you to attach identifying labels to your waveforms.
The labels are preserved when the waveform is saved as a
LabNotebook entry and when saved to file.