Teledyne LeCroy WaveMaster 8 Zi_Zi-A - Manual (Page 87)

Getting Started Manual
922133-00 Rev A 79
3. Touch inside the Grid Intensity data entry control (as follows).
Provide a value from 0 to 100.
4. Touch the Grid on top checkbox if you want to superimpose the grid
over the waveform.
Note: Depending on the grid intensity, some of your waveforms may
be hidden from view when the grid is placed on top. To undo, simply
uncheck Grid on top.
3. Touch the Axis labels checkbox to permanently display the values of
the top and bottom grid lines (calculated from volts/div) and the
extreme left and right grid lines (calculated from the timebase).
4. Choose a line style for your trace: solid Line or Points as follows: