Teledyne LeCroy WaveMaster 8 Zi_Zi-A - Manual (Page 65)

Getting Started Manual
922133-00 Rev A 57
8. Touch inside the Probe Atten. data entry control if you want to set
the attenuation manually, and provide a value using your preferred
input control method. Additional information on using the touch
screen controls can be found in the Dialog Area (on page 33).
Shortcut Toolbar Buttons
Shortcut Toolbar buttons provide quick access to various functions for your
respective channel. The following functions are available:

Measure - Turn on a Measurement trace. Choose a measurement
parameter from the Measurement pop-up window to determine a
wide range of waveform properties. For example, you can use
measurement parameters to automatically calculate many attributes
of your waveform, like rise-time, rms voltage, and peak-to-peak
voltage.

Zoom - QuickZoom automatically displays a zoom of the channel or
trace on a new grid.

Math - Turn on a Math trace. Choose a Math function from the
Math pop-up window.

Decode - Shows the main Decode dialog.

Store - Transfers the current trace into a corresponding memory
trace.

Find Scale - Automatically calculates peak-to-peak voltage, and
chooses an appropriate Volts/Div scale to fully display the
waveform.

Next Grid - This button transfers a copy of your waveform into
another grid. If another grid is not showing, the system creates a
new grid for you.
Note: This button is disabled while using Auto Grid.

Label - Shows the Trace Annotation pop-up where you can provide
label text and positioning information.