Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 104)

Teledyne LeCroy Corporation Trace View Features
104 USB Protocol Suite User Manual
5.1.1 Anchor Points - Synchronized Views
Anchors are provided to indicate the synchronization points between views when
scrolling. These are indicated by a goldenrod Trapezoid. When views are synchronized,
the time denoted by these anchor points in the different views should be the same.
The position within the views are different according to the type of view window. The
Anchor is normally the first packet on the screen in the CATC Trace views and
Spreadsheet Views. Refer to Figure 5.17 through Figure 5.3.
Figure 5.1: Anchor Point in the CATC Trace View
Figure 5.2: Anchor Point in the Navigator Panel
Figure 5.3: Anchor Point in the Spreadsheet View
Microframes