Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 149)

USB Protocol Suite User Manual 149
Chapter 6
Searching Traces
The Search feature provides several options for searching through recorded traffic,
allowing you to find specific packets based on triggering status, packet number, marking,
or content.
To view the Search options:
 Click Search in the Menu bar to display the Search drop‐down menu:
Figure 6.1: Search Drop-down Menu
6.1 Go to Trigger
Note: Go to Trigger is enabled only when a trigger has created the traffic file.
To display a Trigger Event:
 Select Go to Trigger under Search on the Menu Bar.
The Trace View is repositioned to the first packet following the Trigger event. This packet is
at the top of the screen.
The resulting item will be shown as selected in the view.
Packet Selection works with Go to Trigger.