Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 181)

USB Protocol Suite User Manual 181
USB 3.0 Packet Hiding Options Teledyne LeCroy Corporation
Figure 7.4: Display Options USB 2.0 Packet Hiding Dialog
7.4 USB 3.0 Packet Hiding Options
By default, no data packets, transactions, Start‐Of‐Frame packets, PIDS or bus conditions
are hidden. You can hide:
 Link Commands (Flow Control)
 Training Sequences (TS1, TS2, TSEQ)
 Logical Idle Packets
 Upstream Packets
 Downstream Packets
 Skip Sequences
 ISO Time Stamp Packets
 Inter‐Packet Symbols (unexpected packets)
 Link Commands (Power Management)
 Electrical Idles
 LMP Packets
 LFPS Packets
Select the USB3 Packet Hiding tab, then select the data types to hide (see Figure 7.5 on
page 182 .)