Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 121)

USB Protocol Suite User Manual 121
Time Stamp Teledyne LeCroy Corporation
Figure 5.21: Playlist Playback View
5.4 Time Stamp
The Time Stamp field displays the time in “Seconds.Nanoseconds” (decimal).
The Time Stamp is at the beginning of the packet or bus condition. However, the
Time Stamp is at the end of Sync for Low and Full Speed packets.
In the General tab of the Display Options, you can set the Time Stamp Position to be
At the end, At the beginning, or Merge with Packet/Transaction/Transfer. See
“General
Display Options” on page 176 .
To change the time stamp, right‐click the Time Stamp field to display the Time Stamp
menu:
Figure 5.22: Time Stamp Dialog
You can:
 Place the Zero Time Stamp at this packet
 Show the recorded Time Stamp
 Place the Zero Time Stamp at the first packet
 Place the Zero Time Stamp at the trigger packet.