Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 64)

Teledyne LeCroy Corporation Application Startup
64 USB Protocol Suite User Manual
3. To change to Static IP, click the Static IP radio button.
 Enter the IP Address.
 Enter the Subnet Mask.
 Enter the Default Gateway.
Figure 3.4: Device IP Settings Dialog
Click Apply to get a success message and return to the Analyzer Devices dialog.
Note: You can let the system Suggest static IP settings (IP address and subnet mask).
4. Click Close to close the dialog and use the device with a Static IP address.
3.5.4 Analyzer Network
For Ethernet, to display the host machines and analyzers on the local network, select 
Setup > Analyzer Network to display the Analyzer Network dialog.
Figure 3.5: Analyzer Network Dialog
The dialog displays the host machines on the network and the Analyzer devices
connected to the host machines.
You can click Add to display the Add Analyzer Network Node dialog, in which you can
select a host machine on the network (see
Figure 3.6 on page 65 ).