Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 62)

Teledyne LeCroy Corporation Application Startup
62 USB Protocol Suite User Manual
3.5.2 Analyzer Devices
To show the available Analyzer Devices, select Setup > All Connected Devices to display
the Analyzer Devices dialog.
The dialog displays the Device, Location, and Status.
You can click:
 About to display device information (see “Software, Firmware, and BusEngine
Revisions” on page 387 ).
 Update Device (see “Manual Updates to Firmware, BusEngine, and
Serdes BusEngine” on page 392 )
 Update License (see “Updating the Software License” on page 394 )
 Connect to display the Connection Properties dialog, in which you can set the
system to:
 Automatically connect to the device.
 Ask to connect to the device.
 Take no action.
 Add Device to display the Add Ethernet Attached Device dialog, in which you can
enter an IP Address.
 IP Settings to use a DHCP or Static IP address.
To refresh the list of devices, click Refresh Device List.
Before starting recording, select the Analyzer you want to use for recording.