Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 326)

Teledyne LeCroy Corporation Loading the Generation File
326 USB Protocol Suite User Manual
Figure 11.13: Traffic Generation File
Decide how many times you want the traffic pattern to be generated, then select a
value from the Repeat drop‐down menu.
Figure 11.14: Repeat Drop-down Menu
The Repeat mode allows for a single pass through the generation file, looping
forever, or looping 1 to 65,534 times, as desired by the user. If a wrap=HERE location
is found in the .utg file, that location is where the looping portion begins. The loop
end is at the end of the .utg file or up to the stop=HERE statement in the file.
5. Select the Generation mode in which to generate traffic (see below for an
explanation) by depressing or undepressing the IntelliFrame button on the
toolbar:
 Depressed = IntelliFrame
 Undepressed = Bitstream
11.6.1 Traffic Generation Modes: Bitstream vs. Intelliframe
IntelliFrame and Bitstream are modes that control how the generator interacts with
other devices when it is generating traffic.